Right Angle Worm Gearbox, Right Angle Gear Drive

SW-1S and SW-1H Worm Gear Reducers

SW-1S Gear Box

SW-1 Solid Output Shaft Features

SW-1 gear box is 3 3/8" high x 3 7/8" wide x 3" deep
Compression-molded glass-fill polyester gear box
Bronze gear precision-hobbed
Steel ground worm gears
Input shaft is 5/16" O.D. ground and polished steel.
Input shafts are supported by sintered bronze bushings sealed to retain lubrication and keep out dirt
Solid Output Shaft is 1/2" O.D. solid ground and polished steel
Solid Output shafts run with sintered bronze bushings
Net weight is less than 20 ounces.
Available in ratios from 3.5:1 to 60:1 (all ratios are right-hand, left- hand worms gears are custom)
Supplied factory lubrication
SW-1 gear reducer mounting feet may be positioned at any one of eight locations. Additional mounting position options are available here.

Custom Options

Stainless steel shaft (Please specify series stainless needed)
Longer shafts lengths on input and output
Nylon Gear
SW-1 gear reducer mounting feet may be positioned at any one of eight locations. Additional mounting position options are available here.
Left-hand worm gears

Custom solutions to meet your specific application needs.

SW-1H Gear Box

SW-1 Hollow Output Shaft Features

SW-1H is 3 3/8" high x 3 7/8" wide x 3" deep overall
Compression-molded glass-fill polyester gear box
Bronze gear precision-hobbed
Steel ground worm gears
Input shaft is 5/16" O.D. ground and polished steel.
Hollow Output shaft is 5/8" I.D. ground and polished steel
Hollow Output shaft has cross hole to secure solid drive shaft.
Hollow Output shaft run with sintered bronze bushings
Net weight is less than 20 ounces.
Available in ratios from 3.5:1 to 60:1(all ratios are right-hand, left- hand worms gears are custom)
Supplied factory lubricated
SW-1 gear reducer mounting feet may be positioned at any one of eight locations. Additional mounting position options are available here.

Custom Options

Stainless steel shaft (Please specify series stainless needed)
Longer shafts lengths on input and output
Nylon Gear
Internal keyways on Hollow Output Shaft
SW-1 gear reducer mounting feet may be positioned at any one of eight locations. Additional mounting position options are available here.
Left-hand worm gears

Custom solutions to meet your specific application needs.
To place an order, please call 800-544-6642 or email our sales department

HORSEPOWER RATINGS FOR SW-1 SPEED REDUCERS, BRONZE GEAR
RATIO	1800 RPM INPUT
RATIO	INPUT HP	OUTPUT HP	OUTPUT RPM	IN. LBS. TORQUE
3.5:1	.84	.82	514	102
10:1	.33	.30	180	102
15:1	.27	.24	120	102
20:1	.225	.18	90	105
30:1	.15	.12	60	120
40:1	.10	.08	45	112
48:1	.09	.06	38	96
60:1	.075	.035	30	75

1246 High Street, Fairport Harbor, Ohio 44077 USA • U.S. Calls: 800-544-6642 | P: 440-352-8995 | F: 440-352-7682 • sales@torquetrans.com